Roving Networks WIFLY GSX Bedienungsanleitung PDF herunterladen (Seite 56)

www.rovingnetworks.com Version 1.0r 9/21/2012 56

RN-WIFLYCR-UM

SETTING DEBUG PRINT LEVELS

You can enable print functions to assist with debugging the operation and status of the module. The set sys printlvl

<value> command controls these additional print functions, where <value> is a bit-mapped register that controls which

printout messages are sent to the UART. See “set sys printlvl <value>” on page 22 for more information.

Scan Output Format

You enable the scan output using the set sys printlvl 0x4000 command. The scan output format differs, depending on

the firmware you are running.

Firmware Version 2.36 & 2.45

Firmware version 2.36 and 2.45 support a comma-delimited scan output format, which a microprocessor can use to parse

the RSSI information. The scan command output format is:

Index

Channel

RSSI

Security

Mode

Capabilities

WPA

Configuration

WPS

Mode

MAC

address

SSID

Where:

Field

Value

Index

2 character, decimal

Channel

2 character, decimal

RSSI

2 character, decimal (negative number)

Security mode

2!bytes!(see!

Table 24)

Capabilities

Bit-mapped 4 hex bytes (see Table 25)

WPA Configuration

Bit-mapped 2 hex bytes (see Table 26)

WPS Mode

Bit-mapped 2 hex bytes (see Table 27)

MAC address

Address

SSID

Up to 32 chars

NOTE: The string END is added at the end of the scan data.

The following example shows the output format:

SCAN:Found 3

01,01,-59,04,1104,28,c0,20:4e:7f:08:df:85,dad-rules

02,03,-64,02,1104,28,00,00:30:bd:9b:49:22,basement

03,10,-71,04,3100,28,00,90:27:e4:5d:fc:a7,URSOMONEY

END:

Table 24 shows the security modes.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 95 96

Kommentare zu diesen Handbüchern

Keine Kommentare

Roving Networks WIFLY GSX Bedienungsanleitung Seite 56

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Roving Networks WIFLY GSX