Roving Networks Bluetooth Serial Adapter Betriebsanweisung PDF herunterladen (Seite 19)

RN Commands Version 4.25, 11/1/2007 Page 19 of 25

809 University Avenue • Los Gatos, CA 95032 • 1-(408) 395-6539 • [email protected]

www.rovingnetworks.com

6 Factory Default Power up Settings

Bluetooth Service Profile = Serial Port Profile (SPP)

Device Mode = 0 (Slave)

Baud Rate = 115200bps,Parity=None, Data bits = 8 bits(fixed), Stop bits 1 (fixed).

Power Mode = Auto low power discoverable mode

Name of Device (local name) = FireFlyt-XXXX last 2 bytes of BT address

Service Name = SPP

Service Class=0000 (undefined service type)

Major & Minor Class Of Device (COD) = 0x1F00 (unknown device type)

Authentication Disabled

Encryption Disabled

Discovery Enabled (0x0200 = windowl, fixed interval of 0x800= 1.28 Seconds )

Connection Enabled (0x0200=window, fixed interval of 0x800 = 1.28Seconds)

Bonding Disabled

Config Timer=60 seconds

SNIFF mode disabled

Default PIN = “1234”

Note: PIO(4) Switch 1, Set ON at power up time, and then toggled 3 times will change all

settings above back to their factory values. (except the Device name). Device will reboot

immediately upon detection of this mode.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25

Keine Kommentare

Roving Networks Bluetooth Serial Adapter Betriebsanweisung Seite 19