Roving Networks RN-374 Bedienungsanleitung PDF herunterladen (Seite 9)

Advanced User Manual

www.rovingnetworks.com

rn-bluetooth-um Version 4.77 11/21/2009

809 University Avenue • Los Gatos, CA 95032 • Tel (408) 395-6539 • info@RovingNetworks.com

~ 9 ~

SC,001F

SD,0123

SE,<1,0> Encryption 1 to enable, 0 to disable.

SF,1 Set Factory Defaults.

SI, <hex word> - Inquiry Scan Window. Sets amount of time device spends enabling inquiry scan

(discoverability). Minimum value is 0x0012, corresponding to about 1% duty cycle.

Inquiry interval is fixed at 0x800, so time spent in inquiry is 0x12/0x100 by default.

Maximum value is 0x800, set to 0x0000 to disable inquiry scan and make device non-

discoverable. Default value is 0x0200.

SJ, <hex word> Page Scan Window. Sets amount of time device spends enabling page scan

(connectability) . Minimum value is 0x0012, corresponding to about 1% duty cycle.

Page Scan interval is fixed at 0x800, so time spent in page scan mode is 0x12/0x800

by default. Maximum value is 0x800, set to 0x0000 to disable page scan and make

device non-connectable. Default value is 0x0200.

SL,<E,O,N> Set UART parity. Can be any of, Even, Odd, or None. Only the first character is

needed and must be capital.

Example : “SL,E” sets the parity to Even.

SM,<5,4,3,2,1,0> Mode (0=slave, 1=master,2=trigger, 3=auto, 4=DTR, 5=ANY)

Example : “SM,1” sets the mode to Master

SN,<name> Name of the device, 20 characters maximum.

Example: “SN,MyDevice”

S-,<name> Serialized Friendly Name of the device, 15 characters maximum.

This command will automatically append the last 2 bytes of the BT MAC address to

the name. Useful for generating a custom name with unique numbering.

Example: S-,MyDevice will set the name to “MyDevice-ABCD”

SO,<text> Extended Status String, 8 character maximum. Setting this string to from 1 to 8

characters will enable status messages to be sent to the local serial port. Two status

messages are sent, when a Bluetooth connection is established, the string

”<text>CONNECT” will be sent. Upon a Disconnect, the string

<text>DISCONNECT will be sent. This parameter is useful, for example, when

connected to a printer, the printer can examine an escape sequence, if the <text> is

set to ESC%, the printer can parse the ESC%CONNECT and ESC%DISCONNECT

messages without interfering with normal print jobs. In Trigger or Master modes, the

first character of this string is used as the BREAK connection character.

Example: SO,ESC%

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

Keine Kommentare

Roving Networks RN-374 Bedienungsanleitung Seite 9